← Back to rubinobservatory.org

26March2019

Tuesday, March 26, 2019

PROJECT & SCIENCE NEWS - NOTICIAS DEL PROYECTO Y CIENTIFICAS

The updated LSST overview paper, “LSST: From Science Drivers to Reference Design and Anticipated Data Products” was published in the March 11, 2019 issue of The Astrophysical Journal. The paper can be accessed at this link.

Over the last few months, the LSST Scientific Advisory Committee (SAC) has been carefully examining and considering the submitted White Papers on LSST Cadence Optimization, as have Project members. While the SAC is still deliberating and looking into a few specific questions, its report should be available and made public in April.

The LSST Primary/Tertiary Mirror (M1M3) arrived successfully in Houston, Texas, on March 21st after leaving the Richard F. Caris Mirror Lab in Tucson, Arizona, on March 15th. The mirror is scheduled to ship to Chile from the Port of Houston within a few days, and will take approximately five weeks to reach Coquimbo. Details about the mirror’s departure from Tucson can be found in this recent news post, and photos of the M1M3 along the route to Houston are available in the LSST Gallery.

At SLAC National Accelerator Laboratory, two of the six cryogenics circuits comprising the LSST Camera cryo system were recently turned on and temperatures of approximately -130C were achieved on the cryoplate, as designed. This is a tremendous milestone for the Camera and demonstrates early integration of the cryostat, vacuum system and partial refrigeration system.

Assembly and verification of the LSST Coating Plant continues at the LSST summit facility. The team from Von Ardenne recently completed the first sputtering deposition using all of the magnetrons. The magnetron sputtering system will allow depositions with protected silver, bare aluminum, or protected aluminum on either the Primary/Tertiary Mirror (M1M3) or the Secondary Mirror (M2). This important technical milestone demonstrates the successful functioning of both the sputtering system—the heart of the coating chamber—and the vacuum system, which supports the sputtering process. Photos of the ongoing Coating Plant work are available in the LSST Gallery.

INFORMATION FOR PROJECT MEMBERS

Below is the third in our ongoing series of reminders about individual communication channels used within the LSST Project. Information about all LSST communication channels can be found in Document-28656.

The current featured channel is Slack, an LSST Corporation-operated instant messaging application intended for quick conversations. This tool is especially powerful for group discussion. It includes all LSST Science Collaboration members, so “open” Slack channels may not be used for sensitive project information. In general, tasks assigned and decisions made in Slack discussions must be documented elsewhere. It should not be assumed that if someone has a Slack account that they are actively using it. The Project office uses Slack as one of multiple channels of communication; announcements posted on Slack will be repeated elsewhere.

PERSONNEL NEWS

LSST is accepting applications for a Data Management Science Validation Scientist. Information about this and other positions with LSST can be found on the LSST is Hiring web page.

UPCOMING MEETINGS with LSST INVOLVEMENT

(those with asterisk* are LSSTC funded):

2019

 

March 26-27

Project Science Team (PST) meeting, Tucson, AZ

April 1-2

AMCL Meeting, Pasadena, CA

April 8-9

LSST Corporation Institutional Board Face to Face Meeting, Phoenix, AZ

April 11-12

Next Generation Spectroscopy with LSST, Argonne Natn’l Laboratory, Chicago, IL

May 3-4

2nd Workshop on LSST Detection of Optical Counterparts of Gravitational Wave Events, New York, NY*

May 20-23

LSST@Asia, Sydney, Australia*

July 15-19

LSST Dark Energy Science Collaboration (DESC) meeting, APC, Paris, France

August 5-7

LSST Dark Matter Workshop 2019, Chicago, IL*

August 12-16

LSST 2019 Project and Community Workshop, Tucson, AZ

August 19-28

La Serena School for Data Science: Applied Tools for Data-driven Sciences, La Serena, Chile


NOTICIAS DEL PROYECTO Y CIENTIFICAS

El actualizado resumen del artículo de LSST, "LSST: De Impulsores Científicos al Diseño de Referencia y Productos de Datos Anticipados" se publicó en la edición del 11 de marzo, 2019 de The Astrophysical Journal. Se puede acceder al documento en este enlace link.

En los últimos meses, el Comité Asesor Científico de LSST (SAC) ha estado examinando y considerando cuidadosamente las propuestas presentadas sobre la Optimización de Cadencia de LSST, al igual que los miembros del Proyecto. Si bien el SAC aún está deliberando y estudiando algunas preguntas específicas, su informe debería estar disponible y hacerse público en abril.

El espejo primario/terciario de LSST (M1M3) llegó con éxito a Houston, Texas, el 21 de marzo después de irse del laboratorio Richard F. Caris Mirror Lab en Tucson, Arizona, el 15 de marzo. El envío del espejo a Chile desde el Puerto de Houston está previsto para unos pocos días y tardará aproximadamente cinco semanas en llegar a Coquimbo. Los detalles sobre la salida del espejo desde Tucson se pueden encontrar en esta reciente news post, y las fotos de la ruta del M1M3 a Houston están disponibles en la Galería de LSST LSST Gallery.

En SLAC  National Accelerator Laboratory, dos de los seis circuitos de criogenia que comprenden el sistema de crio de la Cámara de LSST fueron encendidos recientemente y se logró llegar a temperaturas de aproximadamente -130C en el cryoplate, como fue diseñado. Este es un gran hito para la Cámara y demuestra la integración temprana del criostato, el sistema de vacío y el sistema de refrigeración parcial.

El ensamblaje y la verificación de la Planta de Revestimiento de LSST continúan en la Instalación de la Cumbre de LSST. El equipo de Von Ardenne recientemente completó el primer recubrimiento de pulverización utilizando todos los magnetrones. El sistema de pulverización de los magnetrones va a permitir depositar con plata protegida, aluminio solo o aluminio protegido en cualquiera de los Espejos Primario/Terciario (M1M3) o para el Espejo Secundario (M2). Este importante hito técnico demuestra el funcionamiento exitoso tanto del sistema de pulverización - el corazón de la cámara de recubrimiento - como del sistema de vacío, el cual apoya el proceso de pulverización. Las fotos del trabajo en curso de la Planta de Revestimiento están disponibles en la Galería de LSST LSST Gallery.

INFORMACIÓN PARA LOS MIEMBROS DEL PROYECTO

A continuación, se encuentra el tercer recordatorio de nuestra serie, sobre los canales de comunicación individuales utilizados en el Proyecto LSST. La información sobre todos los canales de comunicación de LSST se pueden encontrar en el Documento Document-28656.

El canal destacado actual es Slack, una aplicación de mensajería instantánea operada por la Corporación de LSST para conversaciones rápidas. Esta herramienta es especialmente poderosa para la discusión grupal. Incluye a todos los miembros de la Colaboración Científica de LSST, por lo que los canales Slack "abiertos" no se pueden usar para información confidencial del proyecto. En general, las tareas asignadas y las decisiones tomadas en las discusiones de Slack deben documentarse en otra parte. No se debe asumir que si alguien tiene una cuenta de Slack, la está utilizando activamente. La oficina del proyecto usa Slack como uno de los múltiples canales de comunicación; los anuncios publicados en Slack se repetirán en otros lugares.

NOTICIAS DE PERSONAL

LSST está aceptando solicitudes para un Científico de Validación de la Ciencia de Gestión de Datos Data Management Science Validation Scientist. La información sobre esta y otros puestos en LSST se pueden encontrar en la página web de reclutamiento de LSST LSST is Hiring.

PRÓXIMAS REUNIONES CON PARTICIPACIÓN DE LSST 

(aquellas con asterisco * son financiadas por LSSTC):

2019

 

Marzo 26-27

Reunión del Equipo de Científico del Proyecto (PST), Tucson, AZ

Abril 1-2

Reunión AMCL, Pasadena, CA

Abril 8-9

Reunión Cara a Cara de la Junta Institucional de la Corporación LSST, Phoenix, AZ

Abril 11-12

Next Generation Spectroscopy with LSST, Argonne Natn’l Laboratory, Chicago, IL

Mayo 3-4

2nd Workshop on LSST Detection of Optical Counterparts of Gravitational Wave Events, New York, NY*

Mayo 20-23

LSST@Asia, Sydney, Australia*

Julio 15-19

Reunión de la LSST Dark Energy Science Collaboration (DESC), APC, París, Francia

Agosto 5-7

LSST Dark Matter Workshop 2019, Chicago, IL*

Agosto 12-16

Taller del Proyecto y Comunitario LSST 2019, Tucson, AZ

Agosto 19-28

La Serena School for Data Science: Applied Tools for Data-driven Sciences, La Serena, Chile

 

Financial support for Rubin Observatory comes from the National Science Foundation (NSF) through Cooperative Agreement No. 1258333, the Department of Energy (DOE) Office of Science under Contract No. DE-AC02-76SF00515, and private funding raised by the LSST Corporation. The NSF-funded Rubin Observatory Project Office for construction was established as an operating center under management of the Association of Universities for Research in Astronomy (AURA).  The DOE-funded effort to build the Rubin Observatory LSST Camera (LSSTCam) is managed by the SLAC National Accelerator Laboratory (SLAC).
The National Science Foundation (NSF) is an independent federal agency created by Congress in 1950 to promote the progress of science. NSF supports basic research and people to create knowledge that transforms the future.
NSF and DOE will continue to support Rubin Observatory in its Operations phase. They will also provide support for scientific research with LSST data.   




Contact   |   We are Hiring

Admin Login

Back to Top